Water leak protection system
BSE Leak Protect
The water leak protection system detects a leak,
automatically shuts off the water supply, and notifies about the incident.
The principle of operation of the system
When the electrodes get wet, the water leak sensor sends an emergency signal to the controller
In emergency mode, the sound alarm is turned on and the leak zone indicator lights up on the front panel. The controller gives a command to close the ball valves with electric drives.
The ball valves with electric drives shut off the water supply and notify the controller that the closing command has been executed.
Install the Modbus or Zigbee expansion module, integrate the controller into your smart home and receive leak notifications in a way that is convenient for you. We will soon release a Wi-Fi expansion module and you will be able to receive notifications in a mobile app or by email.
Where there is a high risk of leakage
Install wired or wireless water sensors in areas where leaks are likely to occur to prevent flooding in time.
Bath and shower
Bathroom
Laundry
Distribution unit
Flood risk in figures
Statistics of insurance companies in the apartment insurance segment
insurance claims fall under the risk of "water damage" — АльфаСтрахование
appeals due to penetration of liquids from adjacent premises — Росгосстрах
payments due to accidents in water supply, heating and sewerage systems — Росгосстрах
payments for the claimed losses are attributable to the risk of "water damage" — Ингосстрах
Advantages
We have taken into account all the wishes of our customers and partners to make the system convenient and functional.
10 control zones
When there are many bathrooms and toilets in the house, it is important to know where the leak occurred.
Support for 2 risers Double
Control two independent water supply systems
Indication
The front panel displays everything that can happen to the system.
Signaling
You will hear if an accident occurs, the battery dies or the sensor is stolen.
10 control zones
When there are many bathrooms and toilets in the house, it is important to know where the leak occurred.
Support for 2 risers Double
Control two independent water supply systems
Indication
The front panel displays everything that can happen to the system.
Signaling
You will hear if an accident occurs, the battery dies or the sensor is stolen.
Backup power supply
Built-in 1.3 Ah battery provides backup power to the system in case of loss of external 220 V power supply
3-level charge control
Battery performance is determined under load, at idle and under load after a period of time.
Defender Drives
To prevent an accident, reliable drives are needed that shut off the water supply in time
Manual controlKnow-how
The integrated handle allows manual control of the ball valve position
Replacing the inlet valve Know-how
The presence of full manual control allows you to install the actuator instead of the inlet ball valve
Protection against souring
Once every 2 weeks, the system automatically turns the ball valves so that they do not sour
Optical position detection
The actuator is equipped with two optocouplers to determine the current position of the ball valve
Not fully open
In case of jamming or not fully opening/closing, the actuator will transmit the status "not fully open"
Feedback
Transmission of the ball valve position to the smart home via Modbus, Zigbee or MQTT protocols
High torque
Brushless stepper motor with a torque of ~10 Nm is guaranteed to turn even a rusty tap
Supply voltage 12 V
Drive supply voltage completely safe for humans
Protection class IP65
Drives are completely protected from water ingress into the housing
Metal gears
Steel gears of the reducer with additional heat hardening of teeth
1/2, 3/4 and 1 inch
3 diameters of ball valves to choose from
Bonomi Ball Valves
Bonomi Industries is one of the world's leading manufacturers of ball valves
High performance
Maximum pressure up to 40 atmospheres, maximum liquid temperature up to 100°C
Wired sensors
Small-sized wired sensors that can be easily placed in hard-to-reach places
Gold-plated electrodes
Immersion gold plating of electrodes increases the service life of sensors
Lake Sensor Plus
Install Leak Sensor Plus sensors and the system will notify you if the wire is damaged or broken
Parallel connection
You can connect up to 100 sensors in one circuit to one controller
Wireless sensors
For those who do not have the opportunity to lay a cable, we have provided several expansion modules and sensors
Leak Sensor ZB Zigbee
Range - up to 100 m., battery life - up to 3 years. Direct Binding support, built-in backlight
Requires a ZB module
Leak Sensor RF 868 MHz
Range - up to 1000 m., battery life - up to 25 years
Requires an RF module
Advanced Features
The system has many built-in functions and features required by both professionals and ordinary users
Maximum number of wireless sensors supported by one ZB/RF module
The actuator can be installed in any of 4 positions - along or across the ball valve axis
System modifications
Controllers can be equipped with various modules to expand functionality.
- Wired sensors
- Wireless sensors
- Smart home integration
- Water meters
- Compatible modules
Basic
Basic functionality
that can be expanded over time
- —
- —
- —
- Zigbee / RF / Wi-Fi
- Support for wired sensors
- No support for wireless sensors
- No smart home integration
- No support for water meters
- Compatible modules: Zigbee / RF / Wi-Fi
Zigbee
System with ZB module
Supports Direct Binding
- Leak Sensor ZB
- —
- Support for wired sensors
- Support for Zigbee sensors
- Integration into smart home via Zigbee
- Support for water meters
- No support for additional modules
Modbus
Support for Modbus RTU (RS-485).
Many registers available
- —
- RF
- Support for wired sensors
- No support for wireless sensors
- Integration into smart home via Modbus
- Support for water meters
- Compatible with RF module
RFComing soon
System with RF module (868 MHz).
Long range radio communication
- Leak Sensor RF
- —
- —
- Wi-Fi
- Support for wired sensors
- Support for Leak Sensor RF sensors
- No integration into smart home
- No support for water meters
- Compatible with Wi-Fi module
Wi-FiComing soon
Mobile applications,
advanced statistics and local MQTT
- —
- RF
- Support for wired sensors
- No support for wireless sensors
- Integration into smart home via MQTT
- Support for water meters
- Compatibility with RF module
Integrations
Catalog
Download catalog
